Having access to a spanking bench opens up a whole new dimension of CP play. Unfortunately, wooden horses are usually bulky and hard to conceal, which can be a problem if friends or relatives pop in for a surprise visit.
What most CP players really need is a sturdy, lightweight bench that can be easily broken down for storage when spanking time is over. Like this little devil here.
The design is ridiculously simple. Just wrap some padding
around a board and attach a pair of Rugged Buddy Folding Sawhorse
Legs. These powder-coated steel legs lock firmly into place, are designed
for heavy loads, and sell for about $35 a pair at
Amazon.com. This particular bench was
made with the 28" legs, but 34" legs are also available if your spankee is
on the tall side.
Step
1: Cut your board to length and then sand, stain and varnish as
desired. I opted for a 4' length of 2x8, but you can make your bench as
long or as wide as you like.
Step
2: Get your materials together. For this project I used 3" foam and
blue vinyl. When the nice lady at the fabric store asks what you're working
on, just tell her you're reupholstering some old bar stools.
Step
3: Position the board on the foam padding.
Step
4: To make life easier, hold the foam down with your knee and
temporarily tack it into place with upholstery tacks.
Step
5: Position the board and padding on your covering material.
Step
6: Now pull up the first tacks on each side in preparation for wrapping
the covering material around the padding, and tucking the edges underneath.
Step
7: Start wrapping the vinyl over the foam.
Step
8: Tuck the edges of the vinyl underneath the foam on one side, and then
nail the whole mess down with wide-headed nails. Then pull up the next tack
and keep going down the line. I think this process works best if you
complete one side first and then move on to the other.
Step
9: An upholsterer I'm not, but the foam and vinyl are firmly nailed into
place. They're not going anywhere.
Here's
what the board looks like with padding in place. Now the rest is easy.
The Rugged Buddy Folding Sawhorse Legs. Mounting brackets, hardware
and rubber feet are all included.
Step
10: Mount the mounting brackets as per the manufacturer's instructions.
Step
11: Mount the legs to the mounting brackets.
That's
it. Now the next time you want to see your partner's backside high in the
air, ready for a good strappin', just pull your folding bench out from
underneath the bed and tell 'em to "Assume the position."
